The Chrome Frameless Corner Sliding Shower Screen is an L-shaped shower screen with a 10mm glass sliding door on the front and a fixed return panel on the side, with chrome #304 stainless steel fittings. The door side fits 870 to 2000mm and the return panel comes in 800 to 1200mm, all 2000mm high.

Polished chrome fittings reflect light rather than outlining the glass, and match the chrome tapware already in most Australian bathrooms. The sliding door hangs from a stainless steel top rail on rollers and there is no frame around the glass. Choose the door side range that covers your opening, then add the return panel as an option. The glass is toughened for safety and cannot be cut or drilled after manufacture. Backed by a 5 year replacement parts warranty.

A Frameless Corner Shower That Needs No Swing Space

In a corner shower the sliding door runs across the front while the fixed return panel closes off the side. Because the door slides rather than swings, you can place a vanity or toilet close to the shower, and the frameless 10mm glass keeps a small bathroom feeling open.

Key Features of the Chrome Frameless Corner Sliding Shower Screen

• 10mm clear toughened safety glass, 2000mm high
• Frameless: #304 stainless steel top rail, rollers and brackets, with no frame around the glass
• Sliding door runs quietly on rollers with a soft-close stop
• Round recessed handle up to the 1130-1180mm size; square pull handle from the 1180-1230mm size up
• Chrome finish on the rail, rollers, brackets and handle
• Door can be set up to slide open to the left or the right
• Wall channels adjust for out-of-plumb walls: up to 10mm with the standard channel, up to 20mm with the 45mm wide channel
• Return panel from 800mm to 1200mm, chosen as an option
• Toughened glass made to Australian Standards
• 5 year replacement parts warranty
• Pick-up in Sydney (Auburn) or Brisbane (Coopers Plains)
• Licensed installation available across Sydney metro

Chrome Frameless Corner Sliding Shower Screen Specifications

CVP031 Corner Door Side Size Guide

Return Panel Sizes

All sizes are available in Chrome, Matte Black, Brushed Nickel, Brushed Gun Metal, Brushed Brass, Brushed Gold and Brushed Bronze. Opening is the walk-in gap with the door fully slid open and is a guide only; the final figure depends on the installation.

Care & Normal Wear

Squeegee the glass after showering, run the exhaust fan and wipe the bottom guide now and then so the door keeps sliding smoothly. Clean with a mild, non-abrasive cleaner; avoid scourers, bleach and solvent cleaners, which can dull the finish. Like any shower screen, seals, rollers and finishes show normal wear over time, and damage from misuse or harsh cleaning is outside the warranty.

Pick-up and Delivery in Sydney and Brisbane

You can collect this shower screen from our Auburn warehouse in Sydney (NSW 2144) or from our Coopers Plains pick-up point in Brisbane (QLD 4108). When your size and colour are in stock, the screen is usually ready to collect straight away; if it is not in stock, we will confirm the arrival date with you by phone. Please call us before you come in so we can make sure your screen is ready.

We also deliver across the Sydney metro and Brisbane metro areas. For other suburbs and regional areas, freight is calculated from your postcode at checkout.

Frequently Asked Questions About the Chrome Frameless Corner Sliding Shower Screen

How do I measure a corner shower?
Measure the door side from the wall to the outside edge of the shower base at the top, middle and bottom, use the smallest figure and choose the door range that contains it. Then measure the return side and choose the panel whose install range covers it: for example, a 900mm panel fits a return of up to 910mm with the standard channel, or up to 935mm with the 45mm wide channel.

Is the return panel included in the price?
The price shown is for the sliding door side. Choose your return panel size from the options and it is added to the total.

How wide is the gap to walk in?
It depends on the door side: from about 420mm on the 870-890mm size up to about 878mm on the 1800-2000mm size with the door fully open.

Can the glass be cut down to fit?
No. Toughened safety glass is heat-treated after cutting, so it cannot be cut, drilled or notched afterwards without shattering. Order the size range that covers your opening and let the adjustable wall channels take up the difference.

Can I pick up the shower screen in Sydney or Brisbane?
Yes. You can collect from our Auburn warehouse in Sydney (NSW 2144) or our Coopers Plains pick-up point in Brisbane (QLD 4108). In-stock screens can usually be collected straight away; if your size or colour is not in stock, we will call you to confirm when it arrives before you come in.

Do you deliver?
Yes. We deliver across the Sydney metro and Brisbane metro areas. For other suburbs, regional areas and interstate, freight is calculated from your postcode at checkout. Glass is checked before dispatch; please inspect it on delivery before signing.

Do you install shower screens in Sydney?
Yes. Our own licensed installers cover the Sydney metro area, including the Inner West, Eastern Suburbs, North Shore, Northern Beaches, Hills District, Parramatta and Western Sydney, South West Sydney, St George and the Sutherland Shire. Frameless shower screen installation starts from $429. Removing an existing screen and taking away the old screen and rubbish are separate charges, which we can quote before booking.

Installation: This screen must be installed by a licensed, qualified glazier. In the Sydney metro area our own licensed installers can do this for you: see Frameless Shower Screen Installation. RJ Bathroom accepts no liability for damage, injury or product failure arising from self-installation or installation by an unlicensed person. Glass is checked before dispatch; please inspect on delivery before signing.