Twin Shower Rails

A twin shower rail set puts a fixed overhead shower and a handheld shower on one wall-mounted rail, with a diverter to switch between them. Our range runs from compact half-rail sets such as the Sando and Regal to full-height rails like the Ikon Sulu II and the Hampton-style Ikon Clasico gooseneck, in chrome, matte black, brushed nickel, brushed gold, gun metal, brushed copper and stainless steel. Only need one head? Browse our rail showers or the full shower heads and rails range, and see our wall mixers with diverter for the valve that runs your shower.

Twin Shower Rails: Frequently Asked Questions

What is a twin shower rail set?
A twin shower rail set, also called a twin rail shower or dual shower, combines an overhead rain shower and a handheld shower on a single rail. Water enters through one inlet and a diverter sends it either up to the overhead or down the hose to the hand shower, so you get both without a second wall outlet. Overheads in our range run from a 200mm round head on the Cora to a 265mm round head on the Ikon Sulu II and a 315mm x 215mm rectangular head on the Ikon Ceram. Every set comes complete with rail, heads, hose and slider.

Should I choose a top inlet or bottom inlet twin shower?
Match the inlet to where your existing outlet sits. A top inlet set such as the Ikon Sulu II, Ikon Ceram or Otus connects to the high outlet where a standard shower arm usually is. A bottom inlet set such as the Ikon Seto suits an outlet at mid-height, typical of an older hand shower. The Cora, Eden and Ikon Clasico can be plumbed from the top or the bottom, which makes them the most flexible choice in a renovation. Measure your outlet height and confirm the connection with your plumber before you order. For the Cora and Eden sets, the lower wall bracket also slides up and down the rail, and you can watch how the diverter is switched from a top to a bottom inlet.

What is a twin shower with an offset wall outlet?
It is a two-hose design that still runs from one water point. A brass wall elbow fits onto your existing shower outlet and a hose carries water from it into the bottom of the rail, while the second hose feeds the hand shower. Because the elbow is linked by hose rather than fixed to the rail, the outlet does not need to line up with the rail and can sit off to one side, so the rail goes where it suits your shower without moving pipes. We stock it in the Cora (round) and Eden (square) ranges. On the Cora, the upper wall bracket adjusts so the fixing points can sit 600-800mm apart.

Which twin shower suits a low ceiling or small ensuite?
Look at the compact half-rail sets. The Sando (square) and Regal (round) stand only 416mm and 421.5mm tall, yet still carry a 250mm overhead and a three-function hand shower with a rotary diverter. They mount on a single wall outlet, so they work over a bath, in a small ensuite or under a low ceiling. Our full-height rails range from 890mm on the Eden to 1301mm on the Ikon Clasico gooseneck, so check the height between your outlet and the ceiling before choosing a tall rail.

Do you deliver twin showers across Australia?
Yes. We offer free shipping Australia-wide on all tapware, including every twin shower rail set, to every state and territory: Sydney, Melbourne, Brisbane, Perth, Adelaide, Hobart, Canberra and Darwin, plus regional addresses. There is no remote-area surcharge on tapware. Each product page lists the WELS rating, overall height, inlet position and warranty, so you can compare models before you buy. Shower fittings in Australia must be installed by a licensed plumber, so share the dimension drawing on each product page with yours.