Wall top assemblies are the hot and cold handles that fit onto the tap bodies in the wall, giving separate controls for a shower or bath. They are also the usual way to update worn wall taps when the bodies behind the tiles are still sound. Every model turns from off to full flow in a quarter turn. Choose lead free IKON Soko, IKON Hali or IKON Clasico Hampton, or Aquaperla round knob, pin lever and square styles, in chrome, matte black, brushed gold, brushed brass, brushed nickel, gunmetal and brushed copper. Pair them with a bath spout or a rail shower. Prefer one lever? See our shower mixers with diverter, or match the vanity with basin tap sets.
Shower Taps FAQs
▸ What are shower wall taps, and what are they called?
Shower wall taps are also called wall top assemblies, twin taps or hot and cold taps. They are the handles you see on the wall, and they screw onto tap bodies hidden behind the tiles. You set the temperature by balancing the hot and cold handles, and the water runs to a shower rose, a hand held shower or a bath spout. Every pair on this page uses quarter turn ceramic disc spindles, so each handle moves from off to full flow in a quarter turn.
▸ Can I replace shower taps without removing tiles?
Usually, yes, as long as the tap bodies in the wall are sound. A top assembly replaces only the visible half, so a worn or dated pair can be updated without lifting tiles or opening the wall. Before you order, turn the water off, remove one old handle and check the body behind it for leaks or corrosion. A damaged body needs a licensed plumber. Moving to a single-lever shower mixer with diverter also means a different in-wall body, so it is a bigger job than a tap swap.
▸ What size are shower taps, and which handle should I choose?
Most pairs here sit on 50mm to 60mm cover plates, and the Ikon Hali and Soko pairs use 60mm round plates. Then choose the handle by who uses the shower. The Aquaperla round knobs are 41.5mm across and easy to grip with wet hands. Its flat 80mm levers can be pushed on with the back of a hand, which helps children and older users. Slim pin levers look lighter on a feature wall, and cube handles on 50 x 50mm plates line up with square tiles. Check handle projection on each product page.
▸ Which finish suits shower taps best?
Match the taps to the shower head, rail and spout on the same wall first, then to the vanity. Chrome is the easiest finish to match later and wipes clean. Brushed nickel and brushed gold hide water spots better than polished finishes. Matte black gives the sharpest contrast on pale tiles, and gunmetal is a softer dark option. Ikon Hali and Soko both come in five finishes, so pairing them with black shower heads and rails or brushed nickel tapware is simple.
▸ Shower taps or a shower mixer: which is better?
Neither is better for everyone. Taps give you two handles and separate control of hot and cold, and they are the simple choice when your wall already has two tap bodies. A mixer sets flow and temperature with one lever, which is quicker to use but needs a single mixer body in the wall. If the wall is open during a renovation, either works. If the tiles are staying, keep your current layout and replace taps with taps. Then pick the outlet, such as a shower head or a rail shower.