The Brushed Gun Metal Semi Frameless Corner Entry Sliding Shower Screen is a square or rectangular corner shower screen made from two matching halves. Each half has one fixed panel and one sliding door, and the two doors meet at the corner so you step in diagonally through a wide corner entry. It has a brushed gun metal #6463 aluminium frame, 6mm clear toughened safety glass and a 2000mm height, with each side available from 800mm to 1200mm.

Brushed gun metal is a deep charcoal grey with a fine brushed grain. It is darker and warmer than chrome but less stark than black, and works with gun metal or dark grey tapware and concrete-look tiles. The price shown is for one side (Side A). Choose the size of the second side (Side B) from the options and it is added to the total, so a full corner screen is Side A plus Side B. The two sides do not have to match: you can order 1000 x 800mm, 900 x 1200mm or any other combination. The glass is toughened for safety and cannot be cut or drilled after manufacture. Backed by a 5 year replacement parts warranty.

How the Price Works: Side A plus Side B

This screen is sold by the side. Select the Side A size above, then select the Side B size in the options. For example, a 900 x 900mm corner in brushed gun metal is $399 for Side A plus $399 for Side B, $798 in total, and a 1000 x 800mm corner is $409 plus $369, $778 in total. Both sides arrive as one matching corner screen with the same frame finish.

A Corner Entry Shower That Opens Wide Without Swing Space

With a corner entry, both sliding doors open away from the corner, so the walk-in gap is at the front corner of the shower rather than along one side. Nothing swings into the room, which lets you put a vanity, toilet or towel rail close to the shower. It suits ensuites, small main bathrooms and corner shower bases.

Key Features of the Brushed Gun Metal Corner Entry Sliding Shower Screen

• Two sliding doors that meet at the corner for a corner entry
• 6mm clear toughened safety glass, 2000mm high
• Brushed Gun Metal #6463 aluminium frame, top track and round knob handles
• Each side 800 to 1200mm; the two sides can be different sizes
• Price shown is one side; choose the second side in the options
• Reversible: each half can be flipped to suit either side of the corner
• Wall channels take up to 20mm of out-of-plumb wall
• Suits a tiled floor or a shower base
• Glass complies with Australian/New Zealand building standards
• 5 year replacement parts warranty
• Pick-up in Sydney (Auburn) or Brisbane (Coopers Plains)
• Licensed installation available across Sydney metro

Brushed Gun Metal Semi Frameless Corner Entry Sliding Shower Screen Specifications

PC47S Size Guide (per side)

Every size is available in Chrome, Matte Black, Brushed Nickel, Brushed Gun Metal and Brushed Gold. Openings are a guide only; the final figure depends on the installation. Order the size whose fitting range covers your smallest measurement on that side.

Care & Normal Wear

Squeegee the glass after showering, run the exhaust fan and wipe the bottom track now and then so the rollers keep running smoothly. Clean with a mild, non-abrasive cleaner; avoid scourers, bleach and solvent cleaners, which can dull the finish. Like any shower screen, seals, rollers and finishes show normal wear over time, and damage from misuse or harsh cleaning is outside the warranty.

Pick-up and Delivery in Sydney and Brisbane

You can collect this shower screen from our Auburn warehouse in Sydney (NSW 2144) or from our Coopers Plains pick-up point in Brisbane (QLD 4108). When your size and colour are in stock, the screen is usually ready to collect straight away; if it is not in stock, we will confirm the arrival date with you by phone. Please call us before you come in so we can make sure your screen is ready.

We also deliver across the Sydney metro and Brisbane metro areas. For other suburbs and regional areas, freight is calculated from your postcode at checkout.

Frequently Asked Questions About the Brushed Gun Metal Corner Entry Sliding Shower Screen

How do I measure a corner shower?
Measure each side separately, from the wall to the outside edge of the shower base or hob, at the top, middle and bottom. Use the smallest figure on each side and choose the size whose fitting range contains it: for example, a side that measures 905mm takes the 900mm size, which fits 890-915mm.

Is the price for the whole shower screen?
No. The price shown is for one side (Side A). Choose the Side B size in the options and it is added to the total, so a complete corner screen is the two sides together.

Can the two sides be different sizes?
Yes. Each side is chosen separately, so you can order a rectangular corner such as 1000 x 800mm or 900 x 1200mm.

How wide is the gap to walk in?
With both doors open and both sides the same size, the corner entry is about 489mm on 800 x 800mm, 505mm on 900 x 900mm, 576mm on 1000 x 1000mm and 692mm on 1200 x 1200mm.

My shower is between two walls. Is there a wall to wall version?
Yes. The Brushed Gun Metal Semi Frameless Wall to Wall Sliding Shower Screen has a single sliding door for a recess between two walls.

Can the glass be cut down to fit?
No. Toughened safety glass is heat-treated after cutting, so it cannot be cut, drilled or notched afterwards without shattering. Order the size whose range covers your measurement and let the wall channel take up the difference.

Can I pick up the shower screen in Sydney or Brisbane?
Yes. You can collect from our Auburn warehouse in Sydney (NSW 2144) or our Coopers Plains pick-up point in Brisbane (QLD 4108). In-stock screens can usually be collected straight away; if your size or colour is not in stock, we will call you to confirm when it arrives before you come in.

Do you deliver?
Yes. We deliver across the Sydney metro and Brisbane metro areas. For other suburbs, regional areas and interstate, freight is calculated from your postcode at checkout. Glass is checked before dispatch; please inspect it on delivery before signing.

Do you install shower screens in Sydney?
Yes. Our own licensed installers cover the Sydney metro area, including the Inner West, Eastern Suburbs, North Shore, Northern Beaches, Hills District, Parramatta and Western Sydney, South West Sydney, St George and the Sutherland Shire. Semi-frameless shower screen installation is a flat $329. Removing an existing screen and taking away the old screen and rubbish are separate charges, which we can quote before booking.

Installation: This screen must be installed by a licensed, qualified glazier. In the Sydney metro area our own licensed installers can do this for you: see Semi-Frameless Shower Screen Installation. RJ Bathroom accepts no liability for damage, injury or product failure arising from self-installation or installation by an unlicensed person. Glass is checked before dispatch; please inspect on delivery before signing.