The Brushed Bronze (Copper) Frameless Wall to Wall Sliding Shower Screen is a single sliding door shower screen with 10mm clear toughened safety glass and brushed bronze (copper) #304 stainless steel fittings, made to fit between two walls from 870 to 2000mm wide and 2000mm high.

Brushed bronze, also known as brushed copper, is a warm rose-brown metal finish that pairs with copper or bronze tapware and earthy, natural-stone tiles. One fixed panel and one sliding door hang from a stainless steel top rail on rollers, so there is no frame around the glass. Each size covers a range, and the wall channels take up out-of-plumb walls. The glass is toughened for safety and cannot be cut or drilled after manufacture. Backed by a 5 year replacement parts warranty.

Why a Frameless Sliding Door Suits a Wall to Wall Shower

A sliding door runs along the rail instead of swinging out, so it never hits a vanity, toilet or towel rail placed near the shower. That makes it a practical choice for main bathrooms and ensuites where the recess sits close to other fixtures, while the 10mm frameless glass keeps the open, clear look of a frameless shower.

Key Features of the Brushed Bronze Frameless Sliding Shower Screen

• 10mm clear toughened safety glass, 2000mm high
• Frameless: #304 stainless steel top rail, rollers and brackets, with no frame around the glass
• Sliding door runs quietly on rollers with a soft-close stop
• Round recessed handle up to the 1130-1180mm size; square pull handle from the 1180-1230mm size up
• Brushed Bronze (Copper) finish on the rail, rollers, brackets and handle
• Door can be set up to slide open to the left or the right
• Wall channels adjust for out-of-plumb walls: up to 10mm with the standard channel, up to 20mm with the 45mm wide channel
• Toughened glass made to Australian Standards
• 5 year replacement parts warranty
• Pick-up in Sydney (Auburn) or Brisbane (Coopers Plains)
• Licensed installation available across Sydney metro

Brushed Bronze (Copper) Frameless Wall to Wall Sliding Shower Screen Specifications

CVP031 Wall to Wall Size Guide

All sizes are available in Chrome, Matte Black, Brushed Nickel, Brushed Gun Metal, Brushed Brass, Brushed Gold and Brushed Bronze. Opening is the walk-in gap with the door fully slid open and is a guide only; the final figure depends on the installation.

Standard or 45mm Wide Wall Channel

The wall channel is the slim profile that holds the fixed glass against the wall. Every screen comes with the standard 18mm channel, which takes up to 10mm of out-of-plumb wall. You can upgrade to a 45mm wide channel for $49.90 per channel: it takes up to 20mm of out-of-plumb wall and lets the screen reach about 25mm further than the standard channel. A wall to wall screen uses one wall channel, on the fixed panel side. Choose the 45mm wide channel from the options when you order.

The wider channel helps when your measurement sits just above the top of a size range. For example, with a 1145-1150mm opening, the 1130-1180mm screen would sit near the bottom of its range, so the glass panels overlap the most and the walk-in gap is close to its minimum of about 500mm. Ordering the 1050-1130mm screen with a 45mm wide channel uses the smaller screen near the top of its range, with less overlap and a walk-in gap of about 550mm.

Care & Normal Wear

Squeegee the glass after showering, run the exhaust fan and wipe the bottom guide now and then so the door keeps sliding smoothly. Clean with a mild, non-abrasive cleaner; avoid scourers, bleach and solvent cleaners, which can dull the finish. Like any shower screen, seals, rollers and finishes show normal wear over time, and damage from misuse or harsh cleaning is outside the warranty.

Pick-up and Delivery in Sydney and Brisbane

You can collect this shower screen from our Auburn warehouse in Sydney (NSW 2144) or from our Coopers Plains pick-up point in Brisbane (QLD 4108). When your size and colour are in stock, the screen is usually ready to collect straight away; if it is not in stock, we will confirm the arrival date with you by phone. Please call us before you come in so we can make sure your screen is ready.

We also deliver across the Sydney metro and Brisbane metro areas. For other suburbs and regional areas, freight is calculated from your postcode at checkout.

Frequently Asked Questions About the Brushed Bronze Frameless Wall to Wall Sliding Shower Screen

How do I choose the right size?
Measure the distance between the two walls at the top, middle and bottom of the opening, use the smallest figure and choose the range that contains it. For example, a 1250mm opening falls in the 1230-1300mm range. The wall channels take up the rest.

How wide is the gap to walk in?
It depends on the size: from about 420mm on the 870-890mm screen up to about 878mm on the 1800-2000mm screen with the door fully open. The table above lists the opening for each size.

My shower is in a corner. Is there an L-shaped version?
Yes. The Brushed Bronze (Copper) Frameless Corner Sliding Shower Screen uses the same sliding door with a fixed return panel for corner showers.

My measurement is just over the top of a size range. Which size should I order?
Order the smaller size with a 45mm wide wall channel, which reaches about 25mm further than the standard 18mm channel. For a 1145-1150mm opening, the 1050-1130mm size with a 45mm channel gives less glass overlap and a wider walk-in gap than the 1130-1180mm size. The wider channel is $49.90 per channel.

Can the glass be cut down to fit?
No. Toughened safety glass is heat-treated after cutting, so it cannot be cut, drilled or notched afterwards without shattering. Order the size range that covers your opening and let the adjustable wall channels take up the difference.

Can I pick up the shower screen in Sydney or Brisbane?
Yes. You can collect from our Auburn warehouse in Sydney (NSW 2144) or our Coopers Plains pick-up point in Brisbane (QLD 4108). In-stock screens can usually be collected straight away; if your size or colour is not in stock, we will call you to confirm when it arrives before you come in.

Do you deliver?
Yes. We deliver across the Sydney metro and Brisbane metro areas. For other suburbs, regional areas and interstate, freight is calculated from your postcode at checkout. Glass is checked before dispatch; please inspect it on delivery before signing.

Do you install shower screens in Sydney?
Yes. Our own licensed installers cover the Sydney metro area, including the Inner West, Eastern Suburbs, North Shore, Northern Beaches, Hills District, Parramatta and Western Sydney, South West Sydney, St George and the Sutherland Shire. Frameless shower screen installation starts from $429. Removing an existing screen and taking away the old screen and rubbish are separate charges, which we can quote before booking.

Installation: This screen must be installed by a licensed, qualified glazier. In the Sydney metro area our own licensed installers can do this for you: see Frameless Shower Screen Installation. RJ Bathroom accepts no liability for damage, injury or product failure arising from self-installation or installation by an unlicensed person. Glass is checked before dispatch; please inspect on delivery before signing.