Brushed Nickel Frameless 3 Panel Sliding Shower Screen 2000/2100/2200/2300/2400/2500mm | Wall to Wall Centre Entry, 10mm Glass

The Brushed Nickel Frameless 3 Panel Sliding Shower Screen is a wide wall to wall shower screen with two fixed 10mm glass panels and a sliding door between them, on brushed nickel #304 stainless steel fittings. Standard sizes fit 2000 to 2530mm between the walls, 1400 to 2000mm is made to measure, and every screen is 2000mm high.

Brushed nickel is a soft satin silver that shows fewer water spots and fingerprints than chrome, and suits brushed nickel tapware. The sliding door hangs from a stainless steel top rail on rollers and slides across one fixed panel, so you walk in through the centre of a long shower recess. There is no frame around the glass. The glass is toughened for safety and cannot be cut or drilled after manufacture. Backed by a 5 year replacement parts warranty.

A Sliding Screen for Long, Wide Shower Recesses

Once a wall to wall shower gets past about two metres, a single sliding door leaves a very wide fixed panel and an awkward entry at one end. A 3 panel screen splits the run into two fixed panels and a centre door, so the entry sits in the middle of the shower and each glass panel stays a manageable size. Because the door slides rather than swings, nothing in the bathroom needs to clear it.

Key Features of the Brushed Nickel Frameless 3 Panel Sliding Shower Screen

• 10mm clear toughened safety glass, 2000mm high
• Three panels: fixed, sliding door, fixed, with a centre entry
• Frameless: #304 stainless steel top rail, rollers and brackets, with no frame around the glass
• Sliding door runs quietly on rollers with a soft-close stop
• Square pull handle
• Brushed Nickel finish on the rail, rollers, brackets and handle
• Door can be set up to slide open to the left or the right
• Standard sizes from 2000 to 2530mm wall to wall; 1400-2000mm made to measure
• Wall channels adjust for out-of-plumb walls: up to 10mm with the standard channel, up to 20mm with the 45mm wide channel
• Toughened glass made to Australian Standards
• 5 year replacement parts warranty
• Pick-up in Sydney (Auburn) or Brisbane (Coopers Plains)

Brushed Nickel Frameless 3 Panel Sliding Shower Screen Specifications

CVP031 3 Panel Size Guide

All sizes are available in Chrome, Matte Black, Brushed Nickel, Brushed Gun Metal, Brushed Brass, Brushed Gold and Brushed Bronze. Opening is the walk-in gap with the door fully slid open and is a guide only; the final figure depends on the installation.

Made to Measure: 1400-2000mm

For a wall to wall width between 1400 and 2000mm, the three panels are sized to suit your shower. Send us your exact wall-to-wall measurement (top, middle and bottom) before you order, and we will confirm the panel sizes with the factory and call you to check the details.

Standard or 45mm Wide Wall Channel

The wall channel is the slim profile that holds a fixed panel against the wall. Every screen comes with standard 18mm channels, which take up to 10mm of out-of-plumb wall. You can upgrade to a 45mm wide channel for $49.90 per channel: it takes up to 20mm of out-of-plumb wall and lets the screen reach about 25mm further than the standard channel. A 3 panel screen uses two wall channels, one at each fixed panel, and you can upgrade one or both. Choose the 45mm wide channel from the options when you order.

The wider channel helps when your measurement sits just above the top of a size range. For example, with a 2260mm opening, the 2250-2300mm screen would sit at the very bottom of its range with a walk-in gap close to 700mm, while the 2200-2250mm screen with a 45mm wide channel sits near the top of its range, with less glass overlap and a walk-in gap closer to 770mm.

Care & Normal Wear

Squeegee the glass after showering, run the exhaust fan and wipe the bottom guide now and then so the door keeps sliding smoothly. Clean with a mild, non-abrasive cleaner; avoid scourers, bleach and solvent cleaners, which can dull the finish. Like any shower screen, seals, rollers and finishes show normal wear over time, and damage from misuse or harsh cleaning is outside the warranty.

Pick-up and Delivery in Sydney and Brisbane

You can collect this shower screen from our Auburn warehouse in Sydney (NSW 2144) or from our Coopers Plains pick-up point in Brisbane (QLD 4108). When your size and colour are in stock, the screen is usually ready to collect straight away; if it is not in stock, we will confirm the arrival date with you by phone. Please call us before you come in so we can make sure your screen is ready.

We also deliver across the Sydney metro and Brisbane metro areas. For other suburbs and regional areas, freight is calculated from your postcode at checkout.

Installation Manual

The installation manual shows the parts list, fixings and step-by-step assembly drawings for this screen. It is provided as a reference for your licensed glazier; please do not attempt to install the screen yourself. Download the installation manual (PDF, 3.0 MB)

Frequently Asked Questions About the Brushed Nickel Frameless 3 Panel Sliding Shower Screen

How do I choose the right size?
Measure the distance between the two walls at the top, middle and bottom of the opening, use the smallest figure and choose the range that contains it. For example, a 2280mm opening falls in the 2250-2300mm range. The wall channels take up the rest.

My shower is narrower than 2000mm. Can I still have a 3 panel screen?
Yes. Between 1400 and 2000mm the panels are made to measure. Send us your exact wall-to-wall size before ordering and we will confirm the panel sizes and call you to check the details.

How wide is the gap to walk in?
Depending on the size, the door opens to a walk-in gap of roughly 600 to 800mm. The size guide above lists the opening for each size.

Do you have a 2 panel version for a narrower shower?
Yes. For wall to wall widths from 870 to 2000mm, the Brushed Nickel Frameless Wall to Wall Sliding Shower Screen uses one fixed panel and one sliding door.

What is the 45mm wide wall channel for?
It takes up to 20mm of out-of-plumb wall and reaches about 25mm further than the standard 18mm channel, which helps when your measurement sits just above a size range. It is $49.90 per channel and a 3 panel screen uses two.

Can the glass be cut down to fit?
No. Toughened safety glass is heat-treated after cutting, so it cannot be cut, drilled or notched afterwards without shattering. Order the size range that covers your opening and let the adjustable wall channels take up the difference.

Can I pick up the shower screen in Sydney or Brisbane?
Yes. You can collect from our Auburn warehouse in Sydney (NSW 2144) or our Coopers Plains pick-up point in Brisbane (QLD 4108). In-stock screens can usually be collected straight away; if your size or colour is not in stock, we will call you to confirm when it arrives before you come in.

Do you deliver?
Yes. We deliver across the Sydney metro and Brisbane metro areas. For other suburbs, regional areas and interstate, freight is calculated from your postcode at checkout. Glass is checked before dispatch; please inspect it on delivery before signing.

Do you install shower screens in Sydney?
Yes. Our own licensed installers cover the Sydney metro area. Installation for a 3 panel screen is quoted for each job, so please call us for a price.

Note

• Shower base, tray and drain are not included.
• Nano coating is non-refundable.

Installation: This screen must be installed by a licensed, qualified glazier. In the Sydney metro area our own licensed installers can do this for you; please call us for a quote. RJ Bathroom accepts no liability for damage, injury or product failure arising from self-installation or installation by an unlicensed person. Glass is checked before dispatch; please inspect on delivery before signing.