Timber Grain Teak 600mm Mirror Shaving Cabinet – 2 Door Bathroom Mirror Cabinet

The Timber Grain Teak 600mm Mirror Shaving Cabinet is a wall-mounted bathroom mirror cabinet with 2 mirrored doors, two glass shelves and teak woodgrain side panels. It measures 600mm wide, 720mm high and 151mm deep.

The cabinet body is high-strength particleboard with a melamine woodgrain surface in Teak, so the sides read as timber from any angle while the front is full mirror. The inside of the cabinet and the back of each door have the same Teak woodgrain, so the cabinet still looks finished with the doors open. Concealed hinges keep the hardware off the mirror fronts.

A 600mm Mirror Cabinet for Small Bathrooms and Powder Rooms

In a small bathroom the vanity top fills up fast, and a plain mirror gives you nowhere to put anything. The 600mm cabinet sits over a 600mm vanity so the mirror lines up with the basin below, and the two mirrored doors open to 568mm of internal width for toothbrushes, skincare and medicine.

At 151mm deep it holds full-size bottles but stays close to the wall, which matters in a powder room where you stand right at the basin. The teak woodgrain sides give the cabinet some warmth next to white tiles, and they suit a timber or white vanity equally well.

Key Features of the Timber Grain Teak Shaving Cabinet

• 2 mirrored doors: the mirror covers the full 600mm front of the cabinet.
• Two glass shelves: 568mm of internal width behind the doors.
• Teak woodgrain inside: the cabinet interior and the back of each door match the side panels.
• Teak woodgrain side panels: melamine finish that wipes clean and suits timber or white vanities.
• 151mm depth: fits standard bottles while staying close to the wall above the basin.
• Concealed hinges: no visible hardware on the mirror fronts.

Timber Grain Teak 600mm Shaving Cabinet Specifications

Care & Normal Wear

Clean the mirror and woodgrain panels with a soft damp cloth and a mild, non-abrasive cleaner, then dry them. Run the exhaust fan during and after showers. Steam left in an unventilated room, or water running down the cabinet sides, can cause particleboard edges to swell over time, and water damage is not covered by the warranty.

Frequently Asked Questions About the Teak 600mm Shaving Cabinet

Q: Will this fit above a 600mm vanity?
A: Yes. At 600mm wide it matches a 600mm vanity edge to edge. If your vanity is narrower, such as a 500mm unit in a powder room, the cabinet will overhang slightly on each side, which many people are happy with. Check that the doors can open fully without hitting a wall or shower screen.

Q: How high should I hang a shaving cabinet?
A: Installers usually leave around 150 to 250mm between the vanity top and the bottom of the cabinet, so the tap and splashback stay clear. With a 720mm tall cabinet, that puts the mirror at eye level for most adults. Confirm the height with your installer before drilling.

Q: How much space is inside?
A: The internal width is 568mm across two door bays, with two glass shelves inside. The overall depth is 151mm, enough for standard toothpaste, deodorant and skincare bottles.

Q: Will the cabinet cope with bathroom humidity?
A: The melamine surface handles normal shower steam and splashes when the room is ventilated. Keep water off the cabinet edges and wipe up drips, since standing water is what damages particleboard over time.

Q: Is delivery free to Sydney?
A: Yes. Sydney metro orders over $2,000 ship free, as do Melbourne and Canberra. Brisbane and Adelaide are free over $2,500 and Perth over $3,200. Regional NSW, including Newcastle, Wollongong and the Central Coast, is calculated at checkout by weight and postcode. You can also pick up free from our Sydney warehouse.