The Timber 450mm Slimline Wall Hung Vanity in Natural Oak is a wall hung, 255mm deep vanity supplied as a complete unit: the natural oak woodgrain PVC cabinet plus the matching Solid Surface (Matte White) top with an integrated basin, single tap hole, overflow and 32mm waste. Nothing else to specify — it arrives ready for your plumber.

The Warm Option for a Powder Room Guests Actually Notice

A powder room is the one bathroom in the house that visitors always see, and it is usually the smallest. Natural oak gives it something to say: a light, honeyed grain that reads as furniture rather than plumbing, against a wall of dark tile or a bold wallpaper. Because the unit is only 255mm deep and hangs off the wall, you get that furniture look in a room that might only be a metre wide, and the floor underneath stays open so the space still breathes.

Key Features of the Natural Oak Slimline Vanity

• Light natural oak grain: warms up dark tiles and pairs well with brushed brass or matte black tapware.
• Flat door front: smooth, not fluted, so the grain stays continuous across the face.
• 255mm deep: narrow enough for a powder room barely wider than the door.
• PVC board construction: waterproof board rather than a timber veneer over MDF.
• Solid surface top included: matte white with an integrated basin, overflow and 32mm waste.

The Solid Surface Top, Explained

Solid surface is a cast mineral-and-resin composite, not a glazed ceramic shell. The colour runs all the way through, and the basin and the bench are moulded as one seamless piece with no join around the bowl to collect grime. The bowl is shaped to suit a shallow cabinet, so the waste drops close to the wall and leaves the cupboard usable. The tap hole is not centred. There is a single hole on the flat deck at one end of the top, 115mm in from the edge and beside the bowl. The top is not fixed down in the box, so you can turn it 180 degrees at installation to put the tap on the left or on the right, whichever suits your pipework and the side you want to stand.

Natural Oak 450mm Vanity Specifications

Frequently Asked Questions About the Natural Oak 450mm Vanity

Q: Is the door fluted?
A: No — the natural oak and grey oak cabinets have a flat, smooth door. The fluted vertical profile is only on the matte black and matte white versions of this range.

Q: What tapware suits natural oak?
A: Brushed brass and champagne finishes pick up the warm tones in the grain, matte black gives a sharper contrast, and chrome stays neutral. The single tap hole sits on the deck beside the bowl rather than behind it, so a tall or high-rise mixer clears the basin rim more comfortably than a very low-profile spout.

Q: Is it suitable for a bathroom that gets a lot of steam?
A: The cabinet is made from PVC board rather than MDF or particle board, so there is no timber core to swell if moisture reaches an edge or a screw hole. It handles the humidity of a shower room well. Standing water left against any cabinet will eventually cause damage, and water damage is not covered by the warranty.

Q: Do you deliver to my city?
A: Yes — we ship Australia wide. Free metro delivery applies on orders over $2,000 to Sydney, Melbourne and Canberra, over $2,500 to Brisbane and Adelaide, and over $3,200 to Perth. Regional addresses receive a discounted rate, and Sydney customers are welcome to collect free of charge. Below those thresholds freight is calculated at checkout by weight and postcode.

Timber-look finishes are photographed under studio lighting. Screen calibration and room lighting will shift how the grain and tone appear, so treat the images as a guide rather than an exact colour match. Contact us if you would like a real-world photo before ordering.