Kliff 820x450mm Light Brushed Brass Double Bowl Stainless Steel Sink - PVD Kitchen Sink, Bottom Grid, Top or Undermount

The Kliff 820x450mm Light Brushed Brass Double Bowl Kitchen Sink (LK-SDK-820-Brass) is a handmade light brushed brass PVD sink measuring 820 x 450 x 230mm, with two 372.5 x 400 x 230mm bowls. It can be installed topmount or undermount, and the two round wastes and bottom grids are included.

Each bowl is formed from 1.2mm stainless steel with tight R15 corners, giving the crisp, square lines of a modern handmade sink while the rounded inner corners stay easy to wipe clean. Light Brushed Brass is a pale, champagne-toned brass PVD finish. It sits softly against white stone and light timber, and matches light brushed brass tapware. The sink is backed by a 5 year replacement warranty.

Two Even Bowls for Washing and Rinsing

Two equal 372.5mm bowls give you a wash side and a rinse side, or one bowl for dishes and one for food preparation. At 820mm long the sink suits a standard kitchen run, and each bowl has its own waste so both drain independently.

Key Features of the Kliff Light Brushed Brass Double Bowl Sink

• Double bowl - two 372.5 x 400 x 230mm bowls
• 820 x 450 x 230mm overall - 230mm deep bowls
• Handmade PVD stainless steel - 1.2mm thickness with R15 radius corners
• Light Brushed Brass finish - PVD colour coating
• Topmount or undermount - suits stone, laminate and timber benchtops
• Two round wastes and bottom grids included
• 5 year replacement warranty on the sink

Kliff LK-SDK-820-Brass Specifications

Frequently Asked Questions About the Kliff 820mm Double Bowl Sink

Can the Kliff 820mm sink be installed topmount or undermount?

Yes. It can sit under a stone benchtop as an undermount sink, or drop into the bench as a topmount sink. Use the cut-out template and installation guide supplied, and have your stonemason or installer check the cut-out before the benchtop is cut.

What cabinet size does the 820mm sink need?

The sink is 820mm long and 450mm deep overall, and each bowl is 372.5mm wide. Check that the inside of your sink cabinet is wider than the bowls, with room for the waste and plumbing underneath. The 230mm bowl depth also needs clearance above any drawers or bins below.

Why choose a double bowl sink?

Two bowls let you wash in one and rinse or stack in the other, or keep food preparation separate from dirty dishes. It also means one bowl stays usable while the other is soaking. If you mostly use a dishwasher and soak large trays, a large single bowl may suit you better.

How do I look after a PVD coloured sink?

Clean it with warm soapy water and a soft cloth, then rinse and wipe it dry to avoid water spots. Avoid steel wool, abrasive scourers, bleach and strong chemical cleaners, which can mark the coloured coating. Use the bottom grid to keep heavy pots off the base.

Do you deliver to Sydney, Melbourne, Brisbane and Perth?

Yes. The Kliff 820mm sink ships Australia-wide, including Sydney, Melbourne, Brisbane, Adelaide and Perth, with freight calculated at checkout. When the sink is part of a larger order, free metro delivery applies over $2,000 to Sydney, Melbourne and Canberra, over $2,500 to Brisbane and Adelaide, and over $3,200 to Perth. Regional addresses are quoted a discounted freight rate at checkout, and Sydney customers can pick up from our warehouse for free.

⚠️ Important Selection Advice: The sink has no tap hole, so the mixer is mounted on the benchtop. The two round wastes and bottom grids are included; the kitchen mixer and plumbing are not. PVD colour finishes can vary slightly between screens and production batches. Please confirm your benchtop cut-out with the template supplied before cutting.