The Hamilton 1200mm wall hung vanity is a matte black PVC cabinet measuring 1190mm wide x 455mm deep x 500mm high, supplied as a cabinet only so you choose the vanity top that suits your basin, tapware and budget. Tops for this cabinet measure 1205 x 465mm and are ordered separately, in single bowl layout.

The matte black finish gives the cabinet weight and definition, and it is the finish that makes brushed brass, gold or gunmetal tapware look deliberate rather than accidental. Against pale tile or a light stone top the contrast does the decorating for you. A matte surface also hides everyday marks better than gloss black, which shows every fingerprint. The drawer fronts carry a recessed shaker panel - the detail that gives a Hampton bathroom its character - but there are no handles to catch a hip or a towel: the cabinet opens on an integrated finger pull along the top edge of each drawer. Four soft-close drawers run the full width of the cabinet, and the carcass and fronts are PVC rather than a timber-based board, which is what lets Lukka back it with a 10 year limited warranty on parts.

Choosing a Single Bowl at 1200mm Instead of Two

A single bowl across 1190mm of cabinet buys you something a double bowl cannot: an uninterrupted run of bench on one side of the basin. That is where the hairdryer sits, where the makeup bag opens out, where a toddler gets parked during a bath. For a bathroom used by one or two people who are rarely at the basin at the same moment, it is the more useful layout - and you only buy one tap, one waste and one set of connections instead of two. Four soft-close drawers below give you separate zones rather than one shared cavern, and the wall hung mount keeps a cabinet this wide from turning into a visual block across the room.

Key Features of the Hamilton Matte Black Vanity

• Cabinet only - pair it with any 1205 x 465mm top from the options below
• Four soft-close drawers running the full 1190mm width
• Integrated finger pull - no handles to buy, match or bump into
• Recessed shaker drawer fronts for a Hampton look without the fuss of a moulded door
• PVC construction throughout, not a timber-based board with a vinyl wrap
• Wall hung - you set the finished bench height, and the floor stays clear underneath
• Slim 500mm cabinet height and 455mm depth to keep a narrow bathroom walkable
• 10 year limited warranty on cabinet parts

Stone Top Options and Tap Hole Positions

The top is chosen separately so the vanity suits your room rather than ours. Every option is cut to 1205 x 465mm with a single basin cut-out, and tap holes are available at the 12 o'clock position or left undrilled (semi-drilled at the back) if you are running wall mounted tapware.

• Sintered stone with under-mount fine ceramic basin - Carrara, Carrara Gold, Calacatta Night or Blanco White, 50mm profile
• Solid surface - Chasey Matte White, Chasey Matte Black, Calacatta or Calacatta Night, with a seamless integrated bowl
• Natural and engineered stone slabs - Carrara, Calacatta or Nero Marquina, paired with an above counter basin of your choice
• Noah fine ceramic top - the value option, with the bowl and bench moulded in one piece

Hamilton 1200mm Single Bowl Vanity Specifications

Frequently Asked Questions About the Hamilton 1200mm Vanity

Does the price include a vanity top?

No. This listing is the matte black cabinet only, which is why it is priced the way it is. Choose your top from the options above and it is added to your order - that way you are not paying for a ceramic top you were going to replace with stone anyway.

What height should I mount a 1200mm wall hung vanity at?

Because the cabinet is wall hung there is no fixed answer, which is the advantage. Most Australian bathrooms finish the top surface between 850mm and 900mm from the floor; with a 500mm cabinet and a typical top, that puts the underside of the cabinet roughly 320mm to 380mm above the tile. Decide before the wall is lined so the noggings land in the right place.

What is the difference between this and the Harrington Hampton range?

Harrington is a floor-standing Hampton shaker vanity with kickboard and handles. The Hamilton is wall hung, handle free and only 500mm high, so it reads lighter in the room and leaves the floor clear. Same shaker drawer detail, different install and a different look.

Will a PVC vanity handle a steamy bathroom?

The cabinet is PVC rather than a timber-based board, so the material itself does not absorb water the way MDF or particleboard can, and it resists the swelling and edge lifting that affect timber-based cabinetry in wet areas. It still needs normal care: wipe up standing water, run the exhaust fan, and clean with warm soapy water and a microfibre cloth rather than bleach or an abrasive. Water damage and normal wear are not covered by the warranty.

Do you deliver to my city?

Yes. The Hamilton 1200mm vanity ships Australia-wide, and an order of this size usually clears the free metro delivery threshold on its own: over $2,000 to Sydney, Melbourne and Canberra, over $2,500 to Brisbane and Adelaide, and over $3,200 to Perth. Regional addresses receive a discounted freight rate at checkout, and free pick-up is available from our Sydney warehouse.