The Fluted 450mm Slimline Wall Hung Vanity in Matte Black is a wall hung, 255mm deep vanity supplied as a complete unit: the matte black fluted PVC cabinet plus the matching Solid Surface (Matte White) top with an integrated basin, single tap hole, overflow and 32mm waste. Nothing else to specify — it arrives ready for your plumber.

Why 255mm Deep Is the Number That Decides a Powder Room

Most 'slimline' vanities in Australia sit between 300mm and 400mm deep. At 255mm this one is a different category of narrow. In a powder room where the door swings inward, or a toilet room where someone has to walk past the vanity to reach the pan, those extra 100mm are the difference between a room that works and a room you turn sideways in. Hung off the wall, the floor stays clear underneath, which makes the space read larger and makes mopping around the pan far less irritating.

Key Features of the Matte Black Fluted Vanity

• 255mm deep, 450mm wide: fits behind an inward-swinging door and keeps a walkway clear.
• Fluted door front: vertical ribbing in matte black, a texture that reads as considered rather than builder-grade.
• PVC board cabinet: no MDF or particle board core, so there is no timber to swell where the water lands.
• Soft close, finger pull: no handle to catch a hip in a narrow room.
• Solid surface top included: integrated basin, overflow and 32mm waste, already matched to the cabinet.

The Solid Surface Top, Explained

Solid surface is a cast mineral-and-resin composite, not a glazed ceramic shell. The colour runs all the way through, and the basin and the bench are moulded as one seamless piece with no join around the bowl to collect grime. The bowl is shaped to suit a shallow cabinet, so the waste drops close to the wall and leaves the cupboard usable. The tap hole is not centred. There is a single hole on the flat deck at one end of the top, 115mm in from the edge and beside the bowl. The top is not fixed down in the box, so you can turn it 180 degrees at installation to put the tap on the left or on the right, whichever suits your pipework and the side you want to stand.

Matte Black 450mm Vanity Specifications

Frequently Asked Questions About the 450mm Matte Black Vanity

Q: How is it fixed to the wall?
A: It hangs on the wall, so it needs solid fixing behind the plasterboard — noggins or a timber batten set at the height you want, installed before the sheeting goes up where possible. Your plumber or builder will set the waste and water points to match. There are no legs taking any of the load.

Q: Does matte black show fingerprints and water spots?
A: Matte black shows less shine than gloss but it does show dried water spots more than a mid-tone finish, particularly in hard-water areas. A wipe with a soft damp cloth clears them. Avoid abrasive pads and solvent-based cleaners, which will dull the matte texture.

Q: Is it suitable for a bathroom that gets a lot of steam?
A: The cabinet is made from PVC board rather than MDF or particle board, so there is no timber core to swell if moisture reaches an edge or a screw hole. It handles the humidity of a shower room well. Standing water left against any cabinet will eventually cause damage, and water damage is not covered by the warranty.

Q: Do you deliver to my city?
A: Yes — we ship Australia wide. Free metro delivery applies on orders over $2,000 to Sydney, Melbourne and Canberra, over $2,500 to Brisbane and Adelaide, and over $3,200 to Perth. Regional addresses receive a discounted rate, and Sydney customers are welcome to collect free of charge. Below those thresholds freight is calculated at checkout by weight and postcode.