The Ravello 600mm Wall Hung Vanity in Walnut Mocha Oak is a curved-end plywood cabinet supplied as a cabinet only, ready to pair with the benchtop, basin and tapware of your choice. Unlike most curved vanities, the radiused ends are not decorative infill — each one is a working pull-out drawer.

Walnut Mocha Oak is a matt timber-look finish with a warm, low-sheen grain that reads as real timber rather than a print, and it sits comfortably with brushed brass, matte black and gunmetal tapware alike. The cabinet measures 590 x 495 x 470mm and is built around a plywood carcass — cross-laminated layers of real wood rather than compressed fibre — which is what gives it its resistance to bathroom humidity. Inside you get one soft-close door in the centre with a curved pull-out drawer at each end, all running on soft-close hardware. It arrives fully assembled and is backed by a 5-year replacement parts warranty on the cabinetry and on the door and drawer hardware.

Fitting a Curved Vanity Into a Powder Room or Small Ensuite

Small rooms are where square vanity corners do the most damage — a 90-degree edge at hip height in a 900mm walkway is the thing people knock into every day. The Ravello 600mm answers that directly: both ends are radiused, so the cabinet reads narrower than it measures and there is nothing sharp between the door swing and the basin. At 590mm wide and 495mm deep it suits a powder room, a compact ensuite, or a second bathroom where a full-depth vanity would crowd the space, and the wall hung mount leaves the floor clear so the room photographs and cleans larger than it is.

Key Features of the Ravello Walnut Mocha Oak Vanity

• Curved ends that are usable storage, not just styling — each radiused end is a pull-out drawer, so the curve earns its space instead of becoming a dead void like most curved vanities.
• No sharp corner at hip height — both ends are radiused, which softens the room and removes the edge people walk into in a narrow bathroom.
• Plywood carcass — cross-laminated real-wood layers, far more resistant to steam and splashes than MDF or particleboard.
• Handleless finger-pull fronts — nothing protrudes into the walkway and there is no hardware to clean around.
• Soft-close drawers and doors throughout, including the curved end drawers.
• Wall hung — the floor stays clear underneath, which makes the room easier to clean and visually larger.
• Fully assembled on arrival — no flat-pack build on site.
• Cabinet only — choose your own benchtop, basin, waste and tapware.

Benchtop Options and Tap Hole Positions

Ravello benchtops are cut with a matching curved profile so the top follows the radius of the cabinet rather than overhanging it squarely. The finished top measures 605 x 505mm and is drilled for a single basin. All engineered stone options meet Australian Zero Silica requirements.

Option A: Above Counter Basin

Best for: a statement vessel basin sitting on the bench. The slab is supplied with a centre waste cut-out and a semi-drilled tap hole at the back.

• 12mm Solid Surface — Matte White: ultra-modern slimline matte finish, warm to the touch and non-porous.
• 12mm Solid Surface — Calacatta Arctic White: the same slim profile with soft grey veining on a matte white ground.
• 12mm Solid Surface — Calacatta Night: slim 12mm profile with dramatic veining on a dark base.
• 18mm Carrara White Natural Marble: genuine marble with the classic soft grey vein, polished finish.
• 20mm Calacatta White Zero Silica Engineered Stone (WG486): bold marble-inspired veining on a bright base.
• 20mm Calacatta Night Zero Silica Engineered Stone (WG485): the same 20mm profile on a dark base.
• 20mm Blanco White Zero Silica Engineered Stone (WG034): clean, near-solid white.

Tap hole position: No tap hole | 10 o'clock (left) | 12 o'clock (centre) | 2 o'clock (right).

Option B: Undermount Basin

The Aruro integrated undermount top starts at 900mm — at 600mm the Ravello takes an above-counter basin only.

Ravello 600mm Vanity Specifications

Frequently Asked Questions About the Ravello 600mm Vanity

Q: Is the benchtop included in this price?
No. This listing is for the cabinet only. The benchtop, basin, waste and tapware are selected and priced separately, which is what lets you match the finish to the rest of the room instead of accepting a fixed combination.

Q: Why plywood instead of MDF?
Plywood is built from thin layers of real timber glued at right angles to each other. That cross-grain construction resists the steam and splash cycle of a bathroom far better than MDF, which is compressed wood fibre and swells once moisture reaches the core. It is the reason this cabinet carries a 5-year parts warranty on the carcass.

Q: How do I look after a timber-look finish in a humid bathroom?
Wipe spills and splashes off the fronts rather than letting them sit, run the exhaust fan during and for a few minutes after showering, and clean with a soft damp cloth only — no abrasive pads or solvent-based cleaners. Standing water is the one thing no bathroom cabinet is warranted against, so keep the base of the cabinet dry.

Q: Do you deliver a 600mm vanity to my city?
Yes. We ship Australia-wide. Free delivery to metro Sydney, Melbourne and Canberra applies on orders over $2,000, metro Brisbane and Adelaide over $2,500, and metro Perth over $3,200. A 600mm cabinet on its own usually sits under those thresholds, so a delivery charge is calculated at checkout; adding a benchtop, tapware or a shaving cabinet often takes the order over the line. Regional addresses are quoted at checkout, and Sydney customers can collect free of charge.