The Ravello 1500mm Single Bowl Wall Hung Vanity in Sandy Oak Woodmatt is a curved-end plywood cabinet supplied as a cabinet only, ready to pair with the benchtop, basin and tapware of your choice. Unlike most curved vanities, the radiused ends are not decorative infill — each one is a working pull-out drawer.

Sandy Oak Woodmatt is a matt timber-look finish with a warm, low-sheen grain that reads as real timber rather than a print, and it sits comfortably with brushed brass, matte black and gunmetal tapware alike. The cabinet measures 1490 x 495 x 470mm and is built around a plywood carcass — cross-laminated layers of real wood rather than compressed fibre — which is what gives it its resistance to bathroom humidity. Inside you get two soft-close centre drawers, a hinged door on each side and a curved pull-out drawer at each end, all running on soft-close hardware. It arrives fully assembled and is backed by a 5-year replacement parts warranty on the cabinetry and on the door and drawer hardware.

A 1500mm Single Bowl for Uninterrupted Benchtop Space

1490mm with one basin is the most generous bench-to-basin ratio in the range — well over a metre of clear surface, which is what people actually want in a master bathroom once the novelty of two taps wears off. It suits a couple who use the bathroom at different times, or anyone who wants room for daily items to live on the bench without looking cluttered. The cabinet gives you two soft-close centre drawers, a hinged door on each side and a curved pull-out drawer at each end, so the storage matches the width.

Key Features of the Ravello Sandy Oak Woodmatt Vanity

• Curved ends that are usable storage, not just styling — each radiused end is a pull-out drawer, so the curve earns its space instead of becoming a dead void like most curved vanities.
• No sharp corner at hip height — both ends are radiused, which softens the room and removes the edge people walk into in a narrow bathroom.
• Plywood carcass — cross-laminated real-wood layers, far more resistant to steam and splashes than MDF or particleboard.
• Handleless finger-pull fronts — nothing protrudes into the walkway and there is no hardware to clean around.
• Soft-close drawers and doors throughout, including the curved end drawers.
• Wall hung — the floor stays clear underneath, which makes the room easier to clean and visually larger.
• Fully assembled on arrival — no flat-pack build on site.
• Cabinet only — choose your own benchtop, basin, waste and tapware.

Benchtop Options and Tap Hole Positions

Ravello benchtops are cut with a matching curved profile so the top follows the radius of the cabinet rather than overhanging it squarely. The finished top measures 1505 x 505mm and is drilled for a single basin. All engineered stone options meet Australian Zero Silica requirements.

Option A: Above Counter Basin

Best for: a statement vessel basin sitting on the bench. The slab is supplied with a centre waste cut-out and a semi-drilled tap hole at the back.

• 12mm Solid Surface — Matte White: ultra-modern slimline matte finish, warm to the touch and non-porous.
• 12mm Solid Surface — Calacatta Arctic White: the same slim profile with soft grey veining on a matte white ground.
• 12mm Solid Surface — Calacatta Night: slim 12mm profile with dramatic veining on a dark base.
• 18mm Carrara White Natural Marble: genuine marble with the classic soft grey vein, polished finish.
• 20mm Calacatta White Zero Silica Engineered Stone (WG486): bold marble-inspired veining on a bright base.
• 20mm Calacatta Night Zero Silica Engineered Stone (WG485): the same 20mm profile on a dark base.
• 20mm Blanco White Zero Silica Engineered Stone (WG034): clean, near-solid white.

Tap hole position: No tap hole | 10 o'clock (left) | 12 o'clock (centre) | 2 o'clock (right).

Option B: Undermount Basin

Best for: a flush, easy-to-clean benchtop with the bowl set below the surface and no rim to wipe around.

• 12mm Aruro Solid Surface Integrated Basin — Matte White or Matte Black: bowl and benchtop moulded as a single piece with a 32mm overflow waste, so there is no join or silicone line where the basin meets the bench.

Tap hole position: 12 o'clock (centre) semi-drilled at the back, or no tap hole if you are using wall-mounted tapware.

Ravello 1500mm Vanity Specifications

Frequently Asked Questions About the Ravello 1500mm Vanity

Q: Is the benchtop included in this price?
No. This listing is for the cabinet only. The benchtop, basin, waste and tapware are selected and priced separately, which is what lets you match the finish to the rest of the room instead of accepting a fixed combination.

Q: Why plywood instead of MDF?
Plywood is built from thin layers of real timber glued at right angles to each other. That cross-grain construction resists the steam and splash cycle of a bathroom far better than MDF, which is compressed wood fibre and swells once moisture reaches the core. It is the reason this cabinet carries a 5-year parts warranty on the carcass.

Q: How do I look after a timber-look finish in a humid bathroom?
Wipe spills and splashes off the fronts rather than letting them sit, run the exhaust fan during and for a few minutes after showering, and clean with a soft damp cloth only — no abrasive pads or solvent-based cleaners. Standing water is the one thing no bathroom cabinet is warranted against, so keep the base of the cabinet dry.

Q: How is a 1500mm vanity delivered?
Australia-wide, on a pallet or as an oversized carton depending on the run. Free metro delivery applies to Sydney, Melbourne and Canberra over $2,000, Brisbane and Adelaide over $2,500, and Perth over $3,200 — a 1500mm cabinet with a benchtop clears all three comfortably. Please have two people available to take delivery: at 1490mm the cabinet is awkward for one person even before the top goes on. Regional addresses are quoted at checkout, and free pickup is available in Sydney.