Eden Chrome Twin Shower Rail Set with Offset Wall Outlet - Square, Bottom Inlet, Solid Brass

The Eden Chrome Twin Shower Rail Set combines a 200mm square overhead and a three-function push-button hand shower on one rail, and runs from a single water point. It is supplied as a complete set, ready for your plumber to fit.

Chrome is the bright, mirror-polished finish that sits comfortably beside almost any existing tapware, shower screen frame or door hardware, which makes it the easiest finish to match in a renovation. It is backed by a 5-year replacement parts warranty.

How the Offset Wall Outlet Works

This is a two-hose design that needs only one water point. The supplied brass wall elbow fits onto your existing shower outlet, and the first hose carries water from the elbow into the inlet at the bottom of the rail; the second hose feeds the hand shower. Because the wall elbow is connected by hose rather than fixed to the rail, your outlet does not need to line up with the rail - it can sit off to one side. That makes this set a practical upgrade where the old shower outlet is not where you want the new rail, with no need to move pipes. The upper wall bracket is adjustable so the rail can line up with existing fixing points.

Key Features of the Eden Chrome Twin Shower

• 200mm square overhead
• Three-function push-button hand shower on a 1/4-turn adjustable slider
• One water point: the brass wall elbow connects by hose to the bottom inlet of the rail, so the outlet can sit off to the side
• Brass rail in a chrome finish
• 1.5m stainless steel hose; two-hose design (wall elbow to rail, plus hand shower)
• 1039.5mm overall height, 350mm shower arm reach
• WELS 3 star, 8.5 L/min
• 5 years replacement parts warranty

Eden Twin Shower Rail Set Specifications

Care & Normal Wear

Dry the rail and shower heads after use. No tapware finish is unaffected by hard water, prolonged standing water or harsh cleaners, and damage caused by abrasive or solvent-based products sits outside the warranty.

Frequently Asked Questions About the Eden Twin Shower

Will the Eden twin shower fit my existing shower outlet?
Yes. It needs just one water point with a standard G1/2" connection. The brass wall elbow fits onto your existing outlet and a hose links it to the bottom of the rail, so the rail does not have to sit directly over the outlet - it can go where it suits your shower, with the outlet off to one side.

Do I need a plumber to install the Eden twin shower?
Yes. In Australia shower fittings must be installed by a licensed plumber. The set includes the rail, the 200mm square overhead, the hand shower, the wall elbow and hoses, so your plumber fits the wall elbow to your existing outlet, connects it to the rail and fixes the rail to the wall.

How much water does the Eden twin shower use?
It carries a WELS rating of 3 star, 8.5 L/min (registration S15576). WELS ratings are tested at a set pressure, so the flow in your home will vary with your own water pressure.

How do I keep the chrome finish looking right?
Chrome shows water spots quickly, so a quick wipe with a soft dry cloth after showering keeps it bright. Clean with warm water and a soft cloth only. Avoid abrasive creams, scourers, bleach and acidic or chlorine-based cleaners - they attack the finish, and damage caused by the wrong cleaning products is not covered by the warranty.

Do you deliver the Eden Chrome twin shower to my state?
Yes. Free shipping Australia-wide on all tapware, to every state and territory - Sydney, Melbourne, Brisbane, Perth, Adelaide, Hobart, Canberra and Darwin, and to regional addresses as well. There is no remote-area surcharge on tapware.