Aquaperla Lucid Pin Brushed Copper Wall Basin Mixer Set with Spout - Round Pin Lever, In-Wall Body Included

Complete set - trim kit, spout and CLPS in-wall body included.

The Aquaperla Lucid Pin Brushed Copper Wall Basin Mixer Set with Spout is a wall-mounted mixer and spout with a round pin lever and a round 25mm spout with a curved outlet on a 200 x 80mm rectangular cover plate, for wall-hung basins, vessel basins and baths where the benchtop stays clear of tapware.

Brushed copper adds a warm rose-brown tone with a satin grain, a quieter alternative to brass in a neutral bathroom.

One Plate, Round Spout

The round spout and slim pin lever share a single 200 x 80mm plate with rounded corners. The spout reaches 225mm from the wall and drops 41mm at the outlet, so it clears most wall-hung and above-counter basins, and the lever projects 33.5-64.5mm depending on wall depth.

Why Choose a Wall-Mounted Basin Mixer

Moving the mixer and spout onto the wall leaves the benchtop free to wipe down, and it lets you pair the set with a vessel or semi-recessed basin that has no tap hole. Plan it early: the in-wall body has to be set in the wall cavity before tiling, at a height where the outlet sits over the centre of the bowl.

Key Features of the Lucid Pin Brushed Copper Wall Basin Mixer

• 200 x 80mm rectangular cover plate
• Spout reach 225mm from the wall
• Round pin lever
• SEDAL ceramic disc cartridge
• WELS 6 Star, 4.5L/min
• CLPS in-wall body included
• Brushed Copper finish
• Australian Standard
• Manufacturer's warranty

Aquaperla Lucid Pin Wall Basin Mixer Specifications

Care & Normal Wear

Wipe the mixer and spout dry after use. No tapware finish is unaffected by prolonged contact with hard water, soap build-up or harsh cleaners, and damage caused by abrasive or solvent-based products sits outside the warranty.

Frequently Asked Questions About the Aquaperla Lucid Pin Wall Basin Mixer

Can I use the Lucid Pin Brushed Copper wall mixer set for a bath?
Yes. The set works over a wall-hung basin, a vessel basin or a bath. The spout reaches 225mm from the wall, so check that the outlet will sit over the bowl or inside the bath rim once the body is set at your chosen height. Your plumber sets the body depth so the plate finishes flush with the tiles.

Is the in-wall body included?
Yes. This listing is the complete set: the Lucid Pin spout and mixer trim plus the CLPS in-wall body. The body is installed in the wall cavity before tiling, and the spout, plate and lever are fitted after the tiles are finished.

Do I need a plumber to install it?
Yes. In Australia tapware must be installed by a licensed plumber. A wall-mounted basin mixer is best installed during a renovation or new build, while the wall is open, so the body can be set at the correct height and depth before tiling.

How do I keep the finish looking right?
Wipe the mixer dry after use and clean it with warm water and a soft cloth. Avoid abrasive creams, scourers and harsh chemical cleaners - these attack the surface, and damage caused by the wrong cleaning method is not covered by the warranty.

Do you deliver the Lucid Pin Brushed Copper wall basin mixer to my state?
Yes. Free shipping Australia-wide on all tapware, to every state and territory - Sydney, Melbourne, Brisbane, Perth, Adelaide, Hobart, Canberra and Darwin, and to regional addresses as well. There is no remote-area surcharge on tapware.