Kliff 1140x440mm Light Brushed Brass Double Bowl Stainless Steel Sink with Drainer - PVD Kitchen Sink, Top or Undermount

The Kliff 1140x440mm Light Brushed Brass Double Bowl Kitchen Sink with Drainer (LK-SDK1140-BRASS) is a handmade light brushed brass PVD sink measuring 1140 x 440 x 230mm, with two 340 x 400 x 230mm bowls and a 396mm ribbed drainer. It can be installed topmount or undermount, and the two round wastes are included.

Each bowl is formed from 1.2mm stainless steel with tight R15 corners, giving the crisp, square lines of a modern handmade sink while the rounded inner corners stay easy to wipe clean. Light Brushed Brass is a pale, champagne-toned brass PVD finish. It sits softly against white stone and light timber, and matches light brushed brass tapware. The sink is backed by a 5 year replacement warranty.

Two Bowls and a Drainer in One Sink

The Kliff 1140 combines two 340mm bowls with a 396mm ribbed drainer, so washing, rinsing and drip-drying all happen in one piece of steel. Water from the drainer runs straight back into the sink instead of onto the benchtop, which suits busy family kitchens without room for a dish rack.

Key Features of the Kliff Light Brushed Brass Double Bowl Sink

• Double bowl with drainer - two 340 x 400 x 230mm bowls, plus a 396mm drainer
• 1140 x 440 x 230mm overall - 230mm deep bowls
• Handmade PVD stainless steel - 1.2mm thickness with R15 radius corners
• Light Brushed Brass finish - PVD colour coating
• Topmount or undermount - suits stone, laminate and timber benchtops
• Two round wastes included
• 5 year replacement warranty on the sink

Kliff LK-SDK1140-BRASS Specifications

Frequently Asked Questions About the Kliff 1140mm Double Bowl Sink

Can the Kliff 1140mm sink be installed topmount or undermount?

Yes. It can sit under a stone benchtop as an undermount sink, or drop into the bench as a topmount sink. Use the cut-out template and installation guide supplied, and have your stonemason or installer check the cut-out before the benchtop is cut.

What cabinet size does the 1140mm sink need?

The sink is 1140mm long and 440mm deep overall, and each bowl is 340mm wide. Check that the inside of your sink cabinet is wider than the bowls, with room for the waste and plumbing underneath. The 230mm bowl depth also needs clearance above any drawers or bins below.

How long a benchtop does this sink need?

The sink is 1140mm long, so allow at least that length of benchtop plus clearance to any corner, cooktop or wall. The two bowls sit over the sink cabinet and the drainer extends over the neighbouring cabinet, so plan the cabinet layout before the benchtop is cut.

How do I look after a PVD coloured sink?

Clean it with warm soapy water and a soft cloth, then rinse and wipe it dry to avoid water spots. Avoid steel wool, abrasive scourers, bleach and strong chemical cleaners, which can mark the coloured coating.

Do you deliver to Sydney, Melbourne, Brisbane and Perth?

Yes. The Kliff 1140mm sink ships Australia-wide, including Sydney, Melbourne, Brisbane, Adelaide and Perth, with freight calculated at checkout. When the sink is part of a larger order, free metro delivery applies over $2,000 to Sydney, Melbourne and Canberra, over $2,500 to Brisbane and Adelaide, and over $3,200 to Perth. Regional addresses are quoted a discounted freight rate at checkout, and Sydney customers can pick up from our warehouse for free.

⚠️ Important Selection Advice: The sink has no tap hole, so the mixer is mounted on the benchtop. The two round wastes are included; the kitchen mixer and plumbing are not. PVD colour finishes can vary slightly between screens and production batches. Please confirm your benchtop cut-out with the template supplied before cutting.