Shop Matching Showers — Complete the set
Twin Shower Rails
Rail Showers
Hand held Showers
Recently viewed products
Describe your recently viewed products here
Shop More Categories
Corner Shower Screen Layouts: L-Shape, Corner Entry, Curved and Diamond
A corner shower screen comes in four layouts, and the shape of your shower base decides most of the choice. A square or rectangular base suits an L-shape or corner entry screen. A quarter-round base needs a curved screen. A five-sided base needs a diamond screen.
| Layout | Best for | Trade-off | Base it needs | Models to compare |
|---|---|---|---|---|
| L-shape (door plus return panel) | Square or rectangular showers, from small to very wide | The return panel is fixed, so you enter from one side only | Square or rectangular base, or a tiled floor | Pivot, sliding and centre opening models, semi-frameless and frameless |
| Corner entry (two sliding doors that meet at the corner) | Small ensuites where you want to step in at the corner | Each side is a fixed panel plus a slider, so the opening is narrower than a full door | Square or rectangular base, or a tiled floor | Covey double sliding models in five finishes |
| Curved (quarter round) | Tight corners where square edges would get in the way | Only comes in set square sizes | Matching quarter-round base, or a tiled hob built to the same radius | Curved sliding models at 800, 900 and 1000mm |
| Diamond (angled front) | Corners where an angled door gives an easier way in | The pivot door needs clear space in front to swing | Diamond (five-sided) base, or a tiled hob of the same shape | Diamond pivot models at 900 and 1000mm |
Corner shower screens in this collection do not include a shower base, tray or drain, so check the base you have, or plan the one you will buy, before you pick a layout. Over a corner bath, you want bath shower screens instead.
Sliding or Pivot Doors for a Corner Shower Screen
A sliding door on a corner shower screen stays inside the line of the glass, so it suits a small bathroom where a vanity, toilet or towel rail sits close to the shower. A pivot door swings open, so it gives a clearer way in but needs free floor space in front of the screen.
A corner shower screen with sliding doors is the most common type in this range. You can choose a single slider with a return panel, a three-door slider, two centre opening doors on the wider models, or a corner entry pair. Browse all sliding shower screens to compare door styles across other layouts.
A corner shower screen with a pivot door suits a bigger room. The chrome frameless pivot model, for example, opens inwards or outwards. Diamond screens use a pivot door too. See pivot and hinged shower screens for more swing door options.
Most corner shower screens in this collection can be set up to open from the left or the right, so you choose the side on site to suit your taps and drain. Check the door direction notes on each listing.
Frameless or Semi-Frameless Corner Shower Screens
A frameless corner shower screen uses 10mm glass with slim hinges or a top rail, so you see more glass and less metal. A semi-frameless corner shower screen uses 6mm glass in an aluminium frame, which costs less and is lighter to handle. About a third of this collection is frameless.
- Glass: frameless models use 10mm toughened safety glass; semi-frameless models use 6mm toughened safety glass.
- Height: the Covey models are 2000mm high. Check each listing for the others.
- Hardware: the Covey semi-frameless frames are aluminium, and the Covey frameless sliding fittings are stainless steel.
- Standards: Covey screens use toughened safety glass certified to AS 1288 and AS/NZS 2208.
- Warranty: listed on each product page.
For the full range in each style, see frameless shower screens and semi-frameless shower screens.
How to Measure for a Corner Shower Screen
A corner shower screen is measured as two sides: the door side and the return side. Measure each side from the tiled wall to the outer edge of the shower base or hob, then order the size range that covers your smallest measurement. Many models let you order the door side and the return side separately.
- Measure each wall at the bottom, middle and top. Corners are often out of square, and the smallest figure is the one that counts.
- Check the adjustment range on the listing. Most Covey semi-frameless models allow up to 20mm of wall channel adjustment. Covey frameless sliding models allow up to 10mm with the standard channel, or up to 20mm with the wider channel option.
- Curved and diamond screens fit within about 10mm either side of their nominal size, so the base must match closely.
- Glass cannot be cut or drilled after it is made, so confirm your sizes before you order.
If you are unsure which range fits, call our renovation expert team on 0480 746 325 with all six measurements, and we will check them against the listing.
Corner Shower Screen Sizes
Corner shower screen sizes in this collection run from a door side of about 700mm on the smallest pivot models to more than 2,000mm on the widest sliding models. The table shows the ranges in the models below; each listing has the exact options.
| Model type | Glass | Door side | Return side |
|---|---|---|---|
| Covey semi-frameless pivot door | 6mm | 700–1470mm | 790–1210mm, ordered separately |
| Covey semi-frameless corner entry (double sliding) | 6mm | 800–1200mm per side | 800–1200mm per side, ordered separately |
| Covey semi-frameless sliding door | 6mm | 920–1750mm | 800–1200mm option |
| Covey semi-frameless centre opening | 6mm | 1400–2250mm | Return panel option |
| Covey frameless sliding door | 10mm | 870–2000mm | 800–1200mm option |
| Frameless pivot door | 10mm | 800–1200mm | 700–1200mm, ordered separately |
| Curved sliding | 6mm curved | 800 x 800, 900 x 900 or 1000 x 1000mm | |
| Diamond pivot | 6mm | 900 x 900 or 1000 x 1000mm | |
For a corner entry screen, start with the matte black semi-frameless double sliding corner shower screen. For a single slider with a return panel, compare the chrome semi-frameless corner sliding door shower screen.
Corner Shower Screen Finishes
Corner shower screens here come in seven finishes: chrome, matte black, brushed nickel, brushed gold, brushed gun metal, brushed brass and brushed bronze. Chrome and matte black have the most models. Brushed brass and brushed bronze are only offered on frameless models.
Match the screen hardware to your shower mixer and rail so the corner reads as one set. Browse matte black shower screens by colour, then pick wall mixer sets in the same finish.
Choosing a Corner Shower Screen
Choosing a corner shower screen comes down to four things: how much floor space sits in front of the shower, the shape of the base, your budget, and how wide the opening is.
- If your bathroom is small and a vanity sits near the shower, choose a sliding or corner entry screen.
- If you want the widest way in and have floor space in front, choose a pivot door.
- If you have a quarter-round base, choose a curved screen. If you have a five-sided base, choose a diamond screen.
- If you want the least metal on show, choose frameless 10mm glass. If budget matters more, choose semi-frameless 6mm glass.
- If your shower is wider than about 1800mm, choose a centre opening or frameless sliding model.
Delivery, Pickup and Installation for Corner Shower Screens
Every corner shower screen in this collection can be collected free from our Sydney warehouses, with no appointment needed. Covey models, about two thirds of this range, can also be collected free from our Brisbane warehouse in Rocklea (QLD). To see a screen before you buy, call 0480 746 325 to view it at a Sydney warehouse by appointment.
Free metro delivery applies in Sydney on orders over $2,000. Sydney installation is also available; see our bathroom renovation services. For every other screen type, go back to all shower screens.
The RJ Bathroom team in Sydney wrote this guide from the product listings in this collection. If a listing and this guide ever differ, the listing is correct, and you can call us to check before you order.























