Cora Chrome Twin Shower Rail Set - Round, Top or Bottom Inlet, Solid Brass

The Cora Chrome Twin Shower Rail Set combines a 200mm round overhead and a three-function push-button hand shower on one rail, fed from a single top or bottom water inlet. It is supplied as a complete set, ready for your plumber to fit.

Chrome is the bright, mirror-polished finish that sits comfortably beside almost any existing tapware, shower screen frame or door hardware, which makes it the easiest finish to match in a renovation. It is backed by a 7-year replacement parts warranty.

Top or Bottom Inlet: Fitting a Twin Shower to Your Existing Outlet

Most Australian showers have a single wall outlet - either up high where a fixed shower arm sits, or around mid-height where a hand shower connects. The Cora twin shower rail set can be plumbed from the top or the bottom of the rail, so in many renovations it goes straight onto the existing outlet without moving pipes inside the wall. The diverter on the rail is interchangeable between the top and bottom inlet, so it can be set up to suit the outlet you already have, and the lower wall bracket slides up and down the rail so it can be lined up with your existing outlet or fixing point. One outlet then feeds both the overhead and the hand shower. Measure your outlet height and confirm the connection with your plumber before ordering. Watch the installation video to see how the diverter is switched from a top to a bottom inlet.

Key Features of the Cora Chrome Twin Shower

• 200mm round overhead
• Three-function push-button hand shower on a 1/4-turn adjustable slider
• Top or bottom water inlet (diverter interchangeable)
• Height-adjustable lower wall bracket that slides along the rail
• Brass rail in a chrome finish
• 1.5m stainless steel hose
• 913mm overall height, 398mm shower arm reach
• WELS 3 star, 8.5 L/min
• 7 years replacement parts warranty

Cora Twin Shower Rail Set Specifications

Care & Normal Wear

Dry the rail and shower heads after use. No tapware finish is unaffected by hard water, prolonged standing water or harsh cleaners, and damage caused by abrasive or solvent-based products sits outside the warranty.

Frequently Asked Questions About the Cora Twin Shower

Will the Cora twin shower fit my existing shower outlet?
It connects to one existing wall outlet at either the top or the bottom of the rail, so it suits most showers that currently have a fixed shower arm or a mid-height hand shower outlet. The lower wall bracket slides up and down the rail, which gives your plumber some room to line the rail up with the outlet. Your plumber should check the outlet height before installation.

Do I need a plumber to install the Cora twin shower?
Yes. In Australia shower fittings must be installed by a licensed plumber. The set includes the rail, the 200mm round overhead, the hand shower and hose, so your plumber connects it to the existing outlet and fixes the rail to the wall.

How much water does the Cora twin shower use?
It carries a WELS rating of 3 star, 8.5 L/min (registration S17374). WELS ratings are tested at a set pressure, so the flow in your home will vary with your own water pressure.

How do I keep the chrome finish looking right?
Chrome shows water spots quickly, so a quick wipe with a soft dry cloth after showering keeps it bright. Clean with warm water and a soft cloth only. Avoid abrasive creams, scourers, bleach and acidic or chlorine-based cleaners - they attack the finish, and damage caused by the wrong cleaning products is not covered by the warranty.

Do you deliver the Cora Chrome twin shower to my state?
Yes. Free shipping Australia-wide on all tapware, to every state and territory - Sydney, Melbourne, Brisbane, Perth, Adelaide, Hobart, Canberra and Darwin, and to regional addresses as well. There is no remote-area surcharge on tapware.