Aquaperla Arete 635x470mm Matte Black Single Bowl Granite Sink - Black Kitchen & Laundry Sink, Undermount

The Aquaperla Arete 635x470mm Matte Black Single Bowl Granite Sink (OX6347.KS) is a matte black granite sink measuring 635 x 470 x 258mm, with a 565 x 416 x 241mm bowl. It is designed for undermount installation, and a 90mm chrome strainer waste is included.

The sink is moulded from granite in one piece, so the colour runs through the body rather than sitting on the surface. The matte black finish has a soft, low-sheen look that contrasts with white and marble-look stone benchtops and pairs well with black, gun metal or brushed brass tapware. The surface is non-porous and resists everyday stains and scratches. It is backed by a 15 year warranty.

A Large Single Bowl Granite Sink for Kitchens and Laundries

The 565mm wide bowl takes a baking tray, a large frypan or a stockpot flat for soaking, and at 241mm deep it hides a stack of dishes below the benchtop. The waste sits towards the back of the bowl, leaving the base clear for pots and buckets. That makes it equally useful as a main kitchen sink or as a generous laundry sink under a stone benchtop.

Key Features of the Arete Matte Black Granite Sink

• Single bowl - a 565 x 416 x 241mm bowl
• 635 x 470 x 258mm overall - 241mm deep bowl
• Matte Black granite - colour through the body, non-porous surface
• Undermount installation - for stone and other solid benchtops
• Rear-set waste - keeps the bowl base clear
• Included - a 90mm chrome strainer waste
• 15 year warranty on the sink

Aquaperla Arete OX6347.KS Specifications

Frequently Asked Questions About the Arete 635mm Granite Sink

Can the Arete granite sink be installed topmount?

No. The Arete is made for undermount installation only, fixed to the underside of a stone or other solid benchtop with the benchtop edge finishing over the sink rim. If you need a drop-in sink for a laminate benchtop, choose a topmount granite sink such as the Crete range instead. Have your stonemason measure the actual sink before cutting, as the final cut-out is based on the sink itself.

What cabinet size does the 635mm sink need?

The sink is 635mm long and 470mm deep overall, and it hangs below the benchtop, so the inside of the sink cabinet must be wider than the 635mm sink body, with room for the waste and plumbing underneath, and allow for the 258mm overall depth above any drawers or bins.

Is this granite sink suitable for a laundry?

Yes. The 565mm wide and 241mm deep bowl is big enough to soak clothes, fill a bucket or rinse muddy shoes, and an undermount granite sink under a stone benchtop gives a cleaner, easier-to-wipe finish than a freestanding laundry tub.

How do I look after a granite sink?

Rinse and wipe the sink after use, and clean it with warm soapy water and a soft cloth or non-scratch sponge. Do not use bleach, steel wool or drain cleaning products, as damage from these is not covered by the warranty. Do not put hot pots or pans straight from the stove into the bowl, as sudden temperature changes can damage granite.

Do you deliver to Sydney, Melbourne, Brisbane and Perth?

Yes. The Arete 635mm granite sink ships Australia-wide, including Sydney, Melbourne, Brisbane, Adelaide and Perth, with freight calculated at checkout. When the sink is part of a larger order, free metro delivery applies over $2,000 to Sydney, Melbourne and Canberra, over $2,500 to Brisbane and Adelaide, and over $3,200 to Perth. Regional addresses are quoted a discounted freight rate at checkout, and Sydney customers can pick up from our warehouse for free.

⚠️ Important Selection Advice: This sink is undermount only and is not suitable for laminate benchtops. It has no tap hole, so the mixer is mounted on the benchtop. Included: a 90mm chrome strainer waste; the kitchen mixer and plumbing are not included. Do not place hot pots or pans directly in the bowl. Granite colour can vary slightly between screens and production batches. Please have the benchtop cut-out measured from the actual sink before cutting.