Bath Shower Screens

Finding the "Goldilocks" width is critical. It needs to be wide enough to stop splashes, but narrow enough to let you climb in and out easily.

• The Standard: Most single-panel bath screens are 800mm to 900mm wide. This covers the "splash zone" of a standard person showering.
• The Access: Remember, the screen usually sits permanently on the bath edge (or swings). If you go too wide (e.g., 1000mm+ single panel), you might find it difficult to reach the taps or get into the bath without squeezing past the glass.
• Double Panels: If you need more coverage, look for a "Bi-Fold" or "Dual Panel" screen (e.g., 1000mm total width) where the second panel folds away to allow entry.

Frameless is the top choice for modern Australian bathrooms for two reasons: Style and Hygiene.

• Visual Space: Because there is no bulky metal frame outlining the glass, the screen effectively "disappears." This makes small bathrooms look significantly larger and brighter.
• Cleaning: Old-fashioned framed screens have metal channels where soap scum, pink mould, and dirt love to hide. A 10mm Frameless Glass panel has smooth edges with nowhere for grime to build up—just a quick squeegee after use keeps it sparkling.

No. This is the most critical check before you buy!

• Flat Rims Only: Bath screens are designed to sit on a flat, level surface. They work perfectly on standard inset baths (tiled in).
• The Problem: They generally do not work on:Rolled Top / Clawfoot Baths: Because the rim is curved or rounded, the bottom seal cannot make contact, and water will pour out.Baths with "Raised Lips": Some older baths have a high lip around the edge (tiling bead) that prevents the glass from sitting flush.
• Check Your Rim: Place a spirit level on your bath edge. If it's flat and at least 30-40mm wide, you are good to go.

This depends on how you use the bath.

• Swing (Pivoting): The most popular choice. The glass panel is hinged at the wall and can swing outwards (and often inwards).Pros: Allows you to swing the glass out of the way to easily clean the bath, bathe children, or reach the taps to test the water temperature.
• Fixed Panel: The glass is permanently bracketted to the wall and bath.Pros: No moving parts means superior water tightness (siliconed in place).Cons: Can make accessing the taps or cleaning the far end of the bath annoying.

Bath screens are shorter than standard shower screens because they sit on top of the bath (which is already ~450mm high).

• Standard Height: usually 1400mm - 1500mm.
• Total Height: When installed, the top of the glass will be approx 1900mm-2000mm from the floor.
• Why not to the ceiling? You need a gap at the top for steam to escape. If it went to the ceiling, you would create a steam room effect, leading to mould issues on your ceiling paint.

Yes, but they function differently from a fully enclosed shower. They are "Water Deflectors," not aquariums.

• The Seal: The most important component is the PVC Sweep (or Seal) attached to the bottom of the glass. This flexible strip sits tight against the bath rim to stop water running underneath.
• The Hinge: On swinging screens, the hinge mechanism must be high quality to prevent water spraying through the gap.
• Usage Tip: The screen blocks the main spray. However, if you point the showerhead directly at the back of the hinge or the open end, some water may escape. They are designed for normal showering conditions.